Print Page | Close Window

neon light connection

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=84113
Printed Date: May 15, 2024 at 7:50 PM


Topic: neon light connection

Posted By: stewiegriffin
Subject: neon light connection
Date Posted: October 14, 2006 at 6:29 AM

hello.

i want to connect 2 or more  neon as dome light ..so when door open neon is on.. how do i do that. ?

thanks




Replies:

Posted By: jagcaddy61
Date Posted: October 15, 2006 at 2:04 PM
i actually did this a few months ago. if tou have a DVOM, try to trace the circuit back to the fuse panel. open and close the doors to make sure you still have the correct circuit. then wire in the neons from there. you can piggy-back the neon + wires in through the + on the circuit, and i would recommend screwing a sheet metal screw with the neon - wires to the body. make sure you don't blow a fuse. if you do, replace it with an amp rating 5 more than stock. you should be fine though.

-------------
Jamie


Print Page | Close Window