Print Page | Close Window

Bulb Test Cavalier/Sunfire

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=8736
Printed Date: July 17, 2025 at 2:45 PM


Topic: Bulb Test Cavalier/Sunfire

Posted By: mike swanson
Subject: Bulb Test Cavalier/Sunfire
Date Posted: January 28, 2003 at 9:16 PM

Is there a place I can get a diagram showing how to bypass the bulb test in the Cavalier/Sunfire?  I have done it before using one relay, but can't remember how I did it.




Replies:

Posted By: PLAYER69
Date Posted: January 28, 2003 at 9:20 PM
What year is the car? Are you using a passlock bypass kit or relays?

All you do is use a relay with 85 to ground out while remote starting, 86 to starter wire.  30 to ground and 87 to bulb test wire. 



Posted By: mike swanson
Date Posted: January 28, 2003 at 9:36 PM
does this have a resistor somewhere ?



Posted By: PLAYER69
Date Posted: January 28, 2003 at 9:41 PM
I honestly don't remember.  I really doubt it.  I have been using passlock kits for years and haven't used relays to bypass since arond 96 when they first came out.  I would bet no.



Posted By: PLAYER69
Date Posted: January 28, 2003 at 9:47 PM
You can always measure the resistance to ground while cranking. 

Or you can wait for someone who knows for sure :)


Print Page | Close Window