Print Page | Close Window

aux lights with two lighted switches

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=87747
Printed Date: May 03, 2024 at 5:56 AM


Topic: aux lights with two lighted switches

Posted By: jameseric
Subject: aux lights with two lighted switches
Date Posted: December 24, 2006 at 8:43 PM

I have been trying for two days to wire aux lights with two lighted switches. I don't want a single on/off/on switch. I have two switches, diodes, and relays but I can't get it right. I don't always want the aux lights ON while in reverse so I want switch #1 to control the automatic operation of the aux lights when I'm in reverse. I want switch #2 to manually control the aux lights so I can use them as needed regardless on the reverse (+) trigger. How would I modify the above information so I can use the two switches? Switch#1 has a little red dot and switch #2 has a big red button so I won't accidentally leave them on while driving at night.

Thanks,

James




Replies:

Posted By: jameseric
Date Posted: December 24, 2006 at 8:55 PM
PS: The switches are labled ground, accessory, power



Posted By: jameseric
Date Posted: December 24, 2006 at 10:53 PM

posted_image

After reading about 15 pages of this forum I think this might be close.


Print Page | Close Window