6 spotties on ute

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=90793
Printed Date: May 12, 2025 at 3:23 PM

Topic: 6 spotties on ute

Posted By: riteo
Subject: 6 spotties on ute
Date Posted: February 22, 2007 at 5:06 AM

gday ive put 6 100w spotties on top of my 1993 toyota hilux and i have bought 6 relays and fuse holders to suit this application,just wondering if i can link all the relays together,so i can run just one switch for them,they are narva 12v 30amp 5 blade relays...and to wire them to the high beam and to a switch so they can only be on with high beam and i can turn it off at the switch also.does anyone have a diagram for this,cause it would save me alot of time and effort...

thanks

tom

Replies:

Posted By: hottwhyrd
Date Posted: February 22, 2007 at 5:46 PM

YES U CAN BUT MAKE SURE THEIR POWER SUPPLY WIRE IS AS LARGE AS IT NEEDS TO BE.

I WOULD GUESS 8 GUAGE

Posted By: riteo
Date Posted: February 23, 2007 at 4:03 AM

what does 8 gauge mean??? im in australia and im pretty sure we dont use the terms gauge,as far as i know its in mm for example 4mm wire or 3mm wire

tom

Posted By: rodney_rude_1
Date Posted: March 08, 2007 at 8:43 PM

gday mate. from aussie too!

i'd reccomend anything over 4mm. 4mm would be safe

cheers

-------------
=success isnt mesured by the depths of your pockets=

Posted By: riteo
Date Posted: March 22, 2007 at 8:40 AM

ok thanks mate,yeah i bought 4mm to do the job,but ive been told now to atleast run 6 or 8mm from my power source to the relays,and the 4mm will be fine from the relays to the spotties?

this is what ive been told now so i guess its what ill be doing

thanks mate

tom

Print Page | Close Window