04 dodge ram 3500 hid problem

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=94772
Printed Date: May 10, 2024 at 5:20 AM

Topic: 04 dodge ram 3500 hid problem

Posted By: lowaintenough
Subject: 04 dodge ram 3500 hid problem
Date Posted: June 14, 2007 at 7:54 AM

I'm trying to convert my 04 dodge ram 3500 to hid.I have tried the 1k ohm resister between the low beam and ground but I'm not getting a constant 12 volts it is more like a flasher on off on off on off on.I found that if I hook up 2 test lights to the factory light plug it (the light)lights up and stays working.I need a constant 12 volts to turn the relay on to turn the hid ballast on.I think if I can fix the flashing problem from the truck it will fix all my problems.any and all help would be greatly appreciated.if you could send me a drawn out wiring diagram and a list of stuff that I need that would be great.

thanks

Shannon Taylor

LOW AINT ENOUGH CUSTOMS

CONROE TEXAS 77306

Replies:

Posted By: KarTuneMan
Date Posted: June 21, 2007 at 10:45 AM

Get your "constant" 12 volts from your battery.

-------------

Posted By: Tripnbeats
Date Posted: August 02, 2007 at 1:06 PM

dont connect it to the battery use a capacitor if u need more help PM me

Posted By: precision1698
Date Posted: August 18, 2007 at 1:06 PM

I need help with my HIDs in my 05 Dodge Ram. The company sent me a "digital harness" that plugs into my open headlight harness. Then the other end gets t-tapped into the other headlight harness. This harness connects the two grounds and the low beam positives. But my light out indicator is still flasing on the dash.

Posted By: lowaintenough
Date Posted: August 18, 2007 at 9:15 PM

the only way to get the lamp out light to go out and stay out is to wire in another light in with the hid kit.i went to a truck stop and got 2 little lights that could be mountod under the truck and then spray painted them black so they would not be seen. the bulb need to be like a 1157.this puts just enough res.on the system to tell the computer that the lights are working correctly.if yuu have any other ? feel free to e-mail me direct@ lowaintenough@hotmail.com