06 mustang dome light tapping issue
Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=97697
Printed Date: July 14, 2025 at 7:08 AM
Topic: 06 mustang dome light tapping issue
Posted By: nobrks7
Subject: 06 mustang dome light tapping issue
Date Posted: October 05, 2007 at 9:22 AM
Hello, I am trying to wire 4 separate led strands into my car and each has 12 leds meaning 48 total. The dome light fades by going from 12 volts to ground and while on ground, the lights are on, therefore ground is switched and the 12v is constant. My question is how can I add in these leds to come on whenever the domelight does? A diagram would be much appreciated..
Thanks in advance
Replies:
Posted By: i am an idiot
Date Posted: October 05, 2007 at 7:49 PM
Can you get to the contacts that the bulb touches and solder wires to there?
Posted By: ice32
Date Posted: October 06, 2007 at 1:58 AM
hey,
There are two other threads similar to what you wanna do, both have diagrams,
see if these help you out at all
https://www.the12volt.com/installbay/forum_posts.asp~TID~97560~PN~1
(replace the CCFL with your led strips)
https://www.the12volt.com/installbay/forum_posts.asp~TID~96893~PN~1
The hardiest part about these installs seems to be finding the wire or best location to tap into the dome wires.
Good luck, hope this helped.
|