Print Page | Close Window

96 protege, led strips to switch

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=98577
Printed Date: May 14, 2024 at 10:02 AM


Topic: 96 protege, led strips to switch

Posted By: lanceam24
Subject: 96 protege, led strips to switch
Date Posted: November 03, 2007 at 2:17 PM

i am installing two led stips where ur feet go in my 96 protege to a toggle switch. everything was working jus fine, then i disconnected the switch from the wires to cut them down and make em a little bit shorter and to cut the hole where the switch will go. i have the power wire going to my horn fuse i nthe fuse box. the problem is, whenever i plug the fuse bac into the fusebox it makes a little spark and burns off the wire touching it. and it also looks like it burns some of the plastic part of the fuse. it might b because i didnt disconnect all of the wires from the switch when i plugged the fuse back in...




Replies:

Posted By: i am an idiot
Date Posted: November 03, 2007 at 7:00 PM
You have somehow grounded the power wire or you have a bad LED unit.



Posted By: lanceam24
Date Posted: November 03, 2007 at 8:48 PM
yea ok, when i disconnected, and reconnected all the wires, i put the power wire in the wronge place, thanx


Print Page | Close Window