98 grand cherokee how 2 run pwr amp wire

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=100302
Printed Date: April 28, 2024 at 2:43 PM

Topic: 98 grand cherokee how 2 run pwr amp wire

Posted By: madizms
Subject: 98 grand cherokee how 2 run pwr amp wire
Date Posted: December 21, 2007 at 4:13 PM

I want to add an aftermarket amp to my 98 Grand Cherokee, but I can't find any pre-existing wiring holes to run the power wire from the battery to the inside of the car. Could anyone that has already done this help me out? I've seen pictures of installs on other Grand Cherokees but they were for different year vehicles, so the insides of the engine weren't an exact match.

Thanks

Replies:

Posted By: 519civiconair
Date Posted: December 27, 2007 at 12:44 AM

just look on the firewall for a wire loom going into the car.... if you can run the wire with the loom (8-10ga) do soo if not (1-4ga) either drill a hole treat the metal and get a rubber gromet (comes with some amp kits) or use a dull butter knife or something and cut a small slice beside the wires in the wire loom

-------------
F.B.S.S air ride is the only way to roll

Posted By: aznboi3644
Date Posted: December 27, 2007 at 12:46 AM

drill a hole...use a grommet...pretty easy

Print Page | Close Window