amp, enclosure, 2 12'' kicker compvr's
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=100324
Printed Date: April 29, 2024 at 11:27 AM
Topic: amp, enclosure, 2 12'' kicker compvr's
Posted By: ruggerman
Subject: amp, enclosure, 2 12'' kicker compvr's
Date Posted: December 22, 2007 at 7:26 PM
I have 2 12" kicker compvr's running seperate channels on an Audibahn A800v so i am getting 400 rms to each. I have them in a ported box with polyfill now. I have heard ported, no polyfill, ported w/polyfill, closed, you name it. Any feedback from people that know what they are talking about as to what the recommended enclosure would be great. Thanks
Replies:
Posted By: aznboi3644
Date Posted: December 22, 2007 at 8:04 PM
what vehicle and what kind of bass are you wanting??
Posted By: stevdart
Date Posted: December 24, 2007 at 12:47 PM
Sealed is best for those. Follow the guidelines in the manual. ------------- Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.
Posted By: ruggerman
Date Posted: December 29, 2007 at 10:53 PM
I have 2 kicker compvr 12's 400 rms each(4 ohm), and an audiobahn a800v. I have the subs wired down to 2 ohms and running both channels on the amp. At 2 ohms the amp pushes 400 rms x2 or 800x1. Is it safe to wire the subs in paralell to 1 ohm and bridge the amp, or will it be too much for the subs if the amp will even accept a 1 ohm load?
|