2007 santa fe dash trim removal

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=100628
Printed Date: November 04, 2025 at 1:49 AM

Topic: 2007 santa fe dash trim removal

Posted By: wiretapper
Subject: 2007 santa fe dash trim removal
Date Posted: December 31, 2007 at 7:00 PM

Anyone have any tricks to easily remove the dash trim on an '07 Hyundai Santa Fe? I'm a little stumped on this one. What am I missing? It looks like the woodgrain trim panels should pop right out, but they feel like they're going to snap if I pry any harder....and they aren't budging. What's the secret? I understand there are 4 screws under there, but I'll be damned if I can "safely" remove the panels to get to them. I saw the 2 screws on top, but that's about it.

Thanks!

Replies:

Posted By: StealthEs
Date Posted: December 31, 2007 at 7:46 PM

https://documents.victorytechnologies.com//documents/product/95-7325.pdf

-------------
Cris

Posted By: wiretapper
Date Posted: December 31, 2007 at 9:37 PM

Thanks Cris!!

How stupid do I look now? I was pulling only on the woodgrain part. Never saw that the whole panel comes off. I'll have you know I'm laughing at my own stupidity right now. Damn, it's been a LOOONG week.

Thanks again. Obviously very simple if I just opened my eyes a little wider. LOL!!

Posted By: StealthEs
Date Posted: December 31, 2007 at 9:43 PM

No problem, thats why we're all here to help each other out.

-------------
Cris

Print Page | Close Window