reverse mounting w7

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=101352
Printed Date: April 30, 2024 at 1:06 AM

Topic: reverse mounting w7

Posted By: chaos420
Subject: reverse mounting w7
Date Posted: January 19, 2008 at 5:45 AM

Does anybody know if it's possible to reverse mount a JL Audio W7? It's unique mounting method tells me it's not possible, or at least very difficult.

Replies:

Posted By: DYohn
Date Posted: January 19, 2008 at 10:22 AM

Sure it's possible.

-------------
Support the12volt.com

Posted By: Steven Kephart
Date Posted: January 19, 2008 at 11:01 AM

You would have to mount it to a baffel, then mount the baffel to the enclosure. I'm planning on doing this in the shops demo vehicle, finishing it off with a removable fiberglass skin flush with the subwoofer to hide any seams.

Posted By: chaos420
Date Posted: January 19, 2008 at 5:57 PM

Could I just use the baffle it comes mounted to already?

Posted By: DYohn
Date Posted: January 19, 2008 at 7:01 PM

I wouldn't use the shipping baffle, although I suppose you could rig a way to mount it onto an enclosure. Just mount the speaker to the front baffle BEFORE the baffle is installed onto the enclosure. Screw the baffle into place in a way that it can be removed if the speaker ever needs to be removed.

-------------
Support the12volt.com

Posted By: chaos420
Date Posted: January 19, 2008 at 7:04 PM

Sounds good. Makes it alot easier to build my box too because i'm not very handy with wood and wasn't sure how to cut the circular rings.

Thank you.

Print Page | Close Window