ipod connection
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=101359
Printed Date: May 12, 2025 at 9:36 PM
Topic: ipod connection
Posted By: rnemtb
Subject: ipod connection
Date Posted: January 19, 2008 at 11:26 AM
afternoon,
installed an ipod cable to a kenwood kvt617dvd. ipod 5thgen video
ipod connector has the following wires
red=power
black=ground
three rca connectors
hooked it up to kenwood unit at aux input for audio/video signal .
i can not get the video on the H/U screen all connections are correct.get excellent sound from ipod for music and video,just no picture? anyone have ideas what might be wrong other than a bad ipod cable? any help is greatly appreciated.
george
-------------
rnemtb
Replies:
Posted By: DYohn
Date Posted: January 19, 2008 at 12:12 PM
Can you display video from the internal drive? Is the parking brake on? ------------- Support the12volt.com
Posted By: rnemtb
Date Posted: January 19, 2008 at 12:18 PM
parking brake on. dvd's will play fine.no video on video 1 or 2.
-------------
rnemtb
Posted By: Yacht2cool
Date Posted: January 19, 2008 at 1:53 PM
On the ipod itself you have to go into your video settings and turn the tv signal out to on, so that it sends the video signal out. Since you said you have audio for the video from the ipod, that should be what your issue is. Hope that helps and if I'm right it should. So once again on your ipod, go into the video settings and there is a selection called tv signal out, turn that to on since it should be off right now, so turn it to on and you should have video.
Posted By: rnemtb
Date Posted: January 19, 2008 at 2:03 PM
turned on tv signal out,still no picture.guessing cable bad
-------------
rnemtb
Posted By: rnemtb
Date Posted: January 19, 2008 at 2:16 PM
thanks to everyone for the help.
-------------
rnemtb
|