I need some help as where I can run the the amp wires through the firewall of my 2002 Sebring LX. I was out today a little and those engines are tight. I was wondering if anyone could point me in the right direxction so im not randomly removing stuff and not making any progress. Thanks A lot.
Adam Bryant
See if you can find a rubber grommet under your dash. Usually the main wiring harness or the hood cable grommet is what i use. Straighten a coat hanger tape your wire to it, then poke through grommet. The coat hanger helps under the hood. Necessity is the mother of invention, where there's a will there's a way. If there's no grommet, you might have to drill a hole and use your own grommet.
i found a grommet under the driver side but i cant seam to find where it comes out because there is a whole whakc of stuff by it on the hood side. but i will try it again otherwises i may have to drill a hole. and would u be able to tell me what colour the remote antenna is for the chrysler? or is it possible to hook the reote antenna wire up to somewhere in the truck like the lights or something that u may know?
Use the coat hanger through the grommet and find hanger under the hood. It's good for when you can't get your hands in certain areas. As far as your remote wire, there are a few different places you could hook that.
BLACK/ Orange or BLACK/ White in Ign. harness. These are the accessory wires.
Factory amp turn on lead behind stereo, which is light green.
Fuse Box, hook to any fuse that is not powered with truck off.
Remember to test all wires for functionality with multimeter before hooking up anything. Hope this helps, let me know if you need more help. What's your experience level with this stuff?
tried that and couldnt see it these cars are too small. this would be the third vehicle but im taking it in to get it done a lot easier.thanks guys ttyl