Print Page | Close Window

building a single reflex band pass box

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=101554
Printed Date: April 30, 2024 at 7:05 AM


Topic: building a single reflex band pass box

Posted By: tubbs04
Subject: building a single reflex band pass box
Date Posted: January 25, 2008 at 12:17 PM

I want to build a single reflex band pass box for a single stroker 122. When designing this, do I need the recomended sealed air space behind the sub, with the cone firing into the recomended air space for ported? Also, what would you tune the port too? I have specs for 40hz and 45hz. I've never built one of these and I need some help. Thanks



-------------
...don't crush the weasel...



Replies:

Posted By: DYohn
Date Posted: January 25, 2008 at 2:34 PM
Start reading HERE.  Good luck!

-------------
Support the12volt.com


Print Page | Close Window