2000 mustang 460 mach system

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=101682
Printed Date: May 04, 2024 at 12:35 PM

Topic: 2000 mustang 460 mach system

Posted By: congoman
Subject: 2000 mustang 460 mach system
Date Posted: January 28, 2008 at 11:08 PM

Hi all, it's been a long time since the last post. Wondering has anyone ever come across a turn on "pop" from all the speakers after replacing the factory deck? If so, how did you get rid the noise. I installed a Pioneer dehp7800 and tied in with the factory amplified mach system. Thanks in advance

Replies:

Posted By: rudydapimp
Date Posted: January 29, 2008 at 12:36 PM

that is due to the turn on voltage for the factory amp. put a 1k resistor on the remote lead and should take care of it.

Posted By: congoman
Date Posted: January 29, 2008 at 8:17 PM

Great advice, Thanks! I actually had someone tell me the same thing pretty much but instead it was a 5100K resistor. Won't know until the car returns to me.

Posted By: StealthEs
Date Posted: January 29, 2008 at 9:50 PM

Use the 1k, it solves the pop on turn on.

-------------
Cris

Print Page | Close Window