01 chrysler town , country stereo problem

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=101890
Printed Date: May 09, 2025 at 8:55 PM

Topic: 01 chrysler town , country stereo problem

Posted By: twistedcoe
Subject: 01 chrysler town , country stereo problem
Date Posted: February 04, 2008 at 11:40 PM

i need some help here i installed an after market stereo on my 01 chrysler town & country which has the infinity system and it won't play due to the WHITE/ purple wire which on the factory stereo tells the amp to come on. I don't know how to make this work any help would be greatly appreciated. Thanks

Replies:

Posted By: perly
Date Posted: February 05, 2008 at 11:03 AM

all you need to do is get ACC power to the factory turn on. If your deck does not have a remote turn on(blue or blue/white) then simply wire the factory turn on to your red ACC wire and then all should work.

Posted By: twistedcoe
Date Posted: February 05, 2008 at 7:51 PM

ok but another question do you know where the amp is so i can do this? thanks

Posted By: i am an idiot
Date Posted: February 05, 2008 at 8:07 PM

You can do this behind the radio. As stated above, the aftermarket radio should have a Blue wire with a white stripe. Connect this wire to the amp turn on wire.

Posted By: twistedcoe
Date Posted: February 06, 2008 at 9:46 AM

been there done that the white and purple wire does more than just turn on the amp it recieves signals from the steering wheel controls and it only powers on the amp when you first turn it on if you take the wire off hile it is turned on the speakers still play this one little wire has really been a pain

Posted By: perly
Date Posted: February 06, 2008 at 10:01 AM

ok i am not sure of exctly what you need but it is one of these.

Print Page | Close Window