Print Page | Close Window

diamond audio d1 10’s or d6 12’s

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=101916
Printed Date: May 12, 2025 at 5:16 AM


Topic: diamond audio d1 10’s or d6 12’s

Posted By: the fat kid
Subject: diamond audio d1 10’s or d6 12’s
Date Posted: February 05, 2008 at 7:28 PM

hi there first post here i hope i dont butcher the rules

ok i have an 08 dodge ram single cab truck i went to an install shop and hes suggesting me put in either 4 diamond audio d1 10's  https://www.diamondaudio.com/content/view/139/156/  or for a little more step up to 2 d6 12's https://www.diamondaudio.com/content/view/129/143/  but only two of them, the tens have the bigger surface area but the twelves have larger voice coils. idk what do you guys think. i listen to a huge mixture of music but is it unrealistic for me to expect the tens to hit the low notes in songs such as  (jim jones- ballin'    or    baby bash- what is it?)  i listen to alot of rock, country and techno also so idk im torn and uneducated, ive only ever had 12's.  btw if its not against the rules which would be louder and what kind of db can you expect out of a set up like that in a single cab truck... btw if it matters i have an alpine ida-x001 headunit.




Replies:

Posted By: aznboi3644
Date Posted: February 05, 2008 at 8:07 PM
for a single cab pickup...I'd stick with two ported 10s.




Posted By: the fat kid
Date Posted: February 06, 2008 at 7:44 PM
anyone else?



Posted By: greenbroncoguy
Date Posted: February 06, 2008 at 7:49 PM

If you can fit 2 of the 12's and get them in boxes within the recommended airspace requirments, then I would go with them. I personally have never been happy with the performance of 10's...

-Matt


Print Page | Close Window