Print Page | Close Window

box i hope this works

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=101987
Printed Date: May 15, 2025 at 12:36 PM


Topic: box i hope this works

Posted By: mazzasec
Subject: box i hope this works
Date Posted: February 07, 2008 at 9:58 PM

Well I have been getting a TONS of diffrent box designs.

This is what I WANTED to have done

17"H x 42"W x 24"D, 8.174^3ft gross vol. Slot port, 15.5" x 5" x 15.92"Long@37Hz.

Then I asked what do I need to do to have the tuning changed and he said " change the port" and he said he was gonna change it to 15.5" x 5" x 17.5"Long@34hz.

Then he went and measured the width of my EXPLORER and it came out to 44w and not 42. So then he was like ya we can get some extra width in there. I was like ok. And to make it short this is what the box is gonna be and its basically to late now so I hope its right!

I feel that everything just got messed up

18h x 44w x 20d   15.5" x 5" x 17.5"Long@34hz



Replies:

Posted By: aznboi3644
Date Posted: February 07, 2008 at 10:54 PM
What subs??

How much power??




Posted By: mazzasec
Date Posted: February 07, 2008 at 11:21 PM
2 15" ssa icons get 750 watts each



Posted By: DYohn
Date Posted: February 08, 2008 at 10:21 AM
Your enclosure results in about 6.5 cubic feet of usable shared space and the port is at about 34.5Hz.

-------------
Support the12volt.com



Posted By: mazzasec
Date Posted: February 08, 2008 at 9:50 PM
So that should be fine?


Print Page | Close Window