Print Page | Close Window

ground dblock

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=10205
Printed Date: November 15, 2025 at 9:20 AM


Topic: ground dblock

Posted By: bizzy818
Subject: ground dblock
Date Posted: February 28, 2003 at 1:04 PM

when using a ground dblock is it necessary to give a input ground from the floor or somewhere. Or the amp can give the ground from the dblock since its metal. thnx



Replies:

Posted By: Big Purds
Date Posted: February 28, 2003 at 1:11 PM
yes...if you are using a distro block for ground, you should use a good heavy grounding cable (I use 1/0) and make sure you are getting a really clean connection with a good solid grounding point...ie, a bolt in the frame...

you cant pull the ground OUT of the amp to go to a distro block...


Print Page | Close Window