jl 10w6v2 the foam

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=102290
Printed Date: May 12, 2025 at 2:42 AM

Topic: jl 10w6v2 the foam

Posted By: specv
Subject: jl 10w6v2 the foam
Date Posted: February 17, 2008 at 7:08 PM

ive had these for 5 years im putting them into a sealed box and noticed the foam around the sub is cracking rally bad not all the way threw yet. I didnt know what to do use a special glue or silicone to fix it i dont wanna spend a lot of money on them, or send them into jl and how much would that run?

Replies:

Posted By: noobgalore
Date Posted: February 17, 2008 at 8:16 PM

You can purchase new surrounds off of ebay. ( I hope saying that is ok not trying to break any forum rules) pretty cheap also you can fix it with silicone just make sure it is 100% silicone so it will be flexible.

Posted By: aznboi3644
Date Posted: February 17, 2008 at 10:12 PM

It's weird that your surrounds are cracking...I have and old school dual 6 ohm 12W6 and the surround is fine lol.

Print Page | Close Window