3rd component set

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=102327
Printed Date: November 03, 2025 at 9:04 PM

Topic: 3rd component set

Posted By: mattaveli
Subject: 3rd component set
Date Posted: February 18, 2008 at 7:42 PM

ok, i did a search and came up with no hits. so a buddy gave me a couple kenwood crossovers, i'm debating on installing them with another set of mids and tweeters, the problem is i already have 2 component sets running off my deck and a mono amp running my subs, how would i go about wiring in a 3rd component set without buying another amp or is it even possable? maybe i'll just sell the crossovers.

thanks in advance,

matthew

Replies:

Posted By: stevdart
Date Posted: February 18, 2008 at 8:48 PM

What's it for, a bus? If it's not a bus or a stretch limo, save up the extra speakers you accumulate for a future install...or for trading out. That goes for the additional crossovers as well as the extra component set. What you really need is a two or four channel amp to run those components you already have (at least the front pair).

-------------
Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.

Print Page | Close Window