Print Page | Close Window

type x mounting

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=102399
Printed Date: May 10, 2025 at 2:40 AM


Topic: type x mounting

Posted By: s_abercromby
Subject: type x mounting
Date Posted: February 21, 2008 at 9:47 AM

my 10" type x came with three different mounting gaskets, one big one that came on the amp, with holes in it, one thinner one with holes in it and one thin one with no holes in it, i am not reverse mounting it, do i take off the thick one and mount the metal to the box, or do i leave it on and screw it down and then put the thin one with no holes in it over top of the screws. help please.



Replies:

Posted By: aznboi3644
Date Posted: February 21, 2008 at 2:23 PM
the thin one with no holes in it is for looks...you just push it over the rubber gasket that is on the sub for a clean no screw look


Print Page | Close Window