Print Page | Close Window

jensen screen sirus sat radio

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=102797
Printed Date: May 10, 2025 at 4:48 AM


Topic: jensen screen sirus sat radio

Posted By: scottie18
Subject: jensen screen sirus sat radio
Date Posted: March 05, 2008 at 1:26 AM

Hey there everyone...

i have a jensen touchseen model number vm9312 and i had just purchased a new sirus satilite radio model SCC1C is just a vehicle tuner. now the deck is satilite ready with a eight pin connector and i have had the start up signals sent numberous times... but still nothing has clicked through the screen... i am just woundering if there is any way you have to manually adjust the screen to make it work or anything, even a adapter or any thing.... i just need some ideas and that would be great... my truck is a 97 ram 1500 if needed

thanks,

Scott




Replies:

Posted By: Velocity Motors
Date Posted: March 05, 2008 at 9:11 AM
You may have to talk to Sirius about it to make sure that the start up signal is being received by the unit. If the signal is not there for the Jensen, then it will not work. The Jensen will auto detect the input signal at the changer port when a device is attached.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA


Print Page | Close Window