99 honda prelude, new head unit
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=102801
Printed Date: April 28, 2024 at 11:11 PM
Topic: 99 honda prelude, new head unit
Posted By: lude_choy
Subject: 99 honda prelude, new head unit
Date Posted: March 05, 2008 at 10:09 AM
Hi guys,
I recently installed a new deck Innovatek IN-354DTM in my 99 honda prelude. Bought a wire harness for my car. Solder and plug it in my car. Everything works good. Except when i crank the volume high. The speakers chirp or cut off, from high and then low sound, back and fort.
Do you guys have any idea what is causing this? My stock deck sounds really good and loud with no problem.
any inputs would be great.
Thanks.
Al
-------------
allan
Replies:
Posted By: Velocity Motors
Date Posted: March 05, 2008 at 8:39 PM
Does the Prelude have the Acoustic Feedback (AFB) System ? If so, you will need to re-wire the speakers or remove them altogether for aftermarket ones.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: lude_choy
Date Posted: March 06, 2008 at 8:42 AM
I dont really wanna buy after market speakers as my stock speakers works great.....Can i just by pass the AFS? do you have any pix on how to do this?
-------------
allan
Posted By: perly
Date Posted: March 10, 2008 at 8:29 AM
from what Velocity is saying the way to bypass it is by re-wiring all the speakers to the new HU. Personally I would get new speakers instead of re-wiring but maybe that is because I hate going through doorboots so much.
|