how to wire two insignia 4 ohm dvc subs

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=102857
Printed Date: May 04, 2024 at 8:19 PM

Topic: how to wire two insignia 4 ohm dvc subs

Posted By: trippingonbudz
Subject: how to wire two insignia 4 ohm dvc subs
Date Posted: March 07, 2008 at 1:40 AM

posted_image
how would i wire two Insignia 4 ohm dvc subs (600 rms) to a

posted_image

Pioneer GM-5000T for full power or near

Peak Music Power	760 Watts
Number of Channels	2
Load Impedance Capability	2~8 Ohm (Stereo), 4~8 Ohm (Bridged)
Continuous Power (4 ohm)	125W x 2
Continuous Power (2 ohm)	190W x 2
Continuous Power Bridged (4 ohm)	380W x 1

-------------
David

Replies:

Posted By: aznboi3644
Date Posted: March 07, 2008 at 1:50 AM

wire each sub to a channel or wire the subs in series then bridge the amp

Posted By: tezjet
Date Posted: March 07, 2008 at 4:06 AM

each channel of the amp connected to each sub wired like the above pic.

-------------
~Steve
1973 Plymouth Duster

Print Page | Close Window