3 rockford 10 t1’s and t8004 amp

Hey guys,

I have a Rockford T8004 Four channel amp thats selectable 2/4 channel..

I have 3 10" T1's which i don't remember off the top of my head are DVC 2ohms or 4ohms..


Is it possible to run these 3 subs efficiently on this amp? If so can someone post up what the wiring may look like?

Thanks in advance.. you guys are great.

Here are your options (to one channel) if they are 4 ohms:

And here if they are 2 ohms:

Hope these help.

-------------
Soldier: This is the worst part. The calm before the battle.
Fry: And then the battle is not so bad?
Soldier: Oh, right. I forgot about the battle.

Except he has 4 channels that he would like to use all of... (I am assuming)

-------------
It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."

Yeah, the ones that I posted would have to be used with the amp on the 2channel, with it bridged. Of course, there are other configurations that you could achieve with more amp  channels.

-------------
Soldier: This is the worst part. The calm before the battle.
Fry: And then the battle is not so bad?
Soldier: Oh, right. I forgot about the battle.

Depending on whether he has the 4 ohm or 2 ohm, he can STILL usa all four channels. We need to know that though.

-------------
It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."