repair alpine sub?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=103577
Printed Date: May 03, 2024 at 7:26 AM

Topic: repair alpine sub?

Posted By: mr^man
Subject: repair alpine sub?
Date Posted: April 01, 2008 at 12:11 AM

I have an Alpine SWS-1022D (the 2x2ohm version)

This evening, I discovered that the rattling noise coming from it is the plastic ring to which the spider is attached, vibrating against the basket.

It looks like it's only loose on one side. Does anyone here have any suggestions on how to fix this? I'm hoping I don't need to replace the sub, because I happen to like it, and I don't really feel like dropping a hundred bucks or more on another one.

Thanks in advance for your answers.

Mr^Man

Replies:

Posted By: jmelton86
Date Posted: April 01, 2008 at 12:24 AM

If you can get in there with some epoxy or something like that, that may work.

-------------
2013 Kia Rio -90a alternator
DDX470HD GTO14001 GTO1014D (x3)
Big3 in 1/0G
1/0G to GTO14001

Posted By: sedate
Date Posted: April 01, 2008 at 12:29 AM

Yea that's what I was thinking - can you just gingerly glue it a bit?

-------------
"I'm finished!" - Daniel Plainview

Posted By: dipset1413
Date Posted: April 01, 2008 at 2:32 AM

if u can epoxy or rubber silicone

-------------
WES

Print Page | Close Window