factory remote wire
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=103662
Printed Date: May 10, 2025 at 12:59 AM
Topic: factory remote wire
Posted By: fatboybuick
Subject: factory remote wire
Date Posted: April 02, 2008 at 9:40 PM
Hello I'm looking to hook up a sub combo in my 2000 chrysler concorde. I'm leaving the factory radio in, so I will be running a rca line out converter to get a set of rca's for the amp, and a amp kit.. The amp will only be running the subs. When I just looked at the car wiring for this model car there isn't a remote turn on for the factory radio. My question is how do I run a remote wire for my amp when there isn't one present, how is this done. Any help will be greatly appreciated. thank you.
-------------
fatboybuick
Replies:
Posted By: spookiestylez
Date Posted: April 02, 2008 at 9:44 PM
hook your remote wire up to the RED / white wire behind the factory radio, thats the radios accessory wire. Most people hook up the LOC (line out converter) to the rear speakers which in your car are
Rear left +/-
BROWN / yellow
BROWN / light blue
Rear right +/-
Dark blue/white
Dark blue/orange
those wires are behind the factory radio aswell
cheers
-------------
RTFM
Posted By: fatboybuick
Date Posted: April 03, 2008 at 6:02 AM
Thanks much for all the info, I'm going to tackle it soon, I'll keep you posted on the out come.
-------------
fatboybuick
Posted By: spookiestylez
Date Posted: April 15, 2008 at 9:14 PM
no problem, good luck on your install
-------------
RTFM
|