Print Page | Close Window

rockford amp is not working

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=103926
Printed Date: April 26, 2024 at 6:04 AM


Topic: rockford amp is not working

Posted By: audiohookup
Subject: rockford amp is not working
Date Posted: April 12, 2008 at 1:11 PM

Can anyone tell me where i can get parts to fix this? It's a Rockford P3002. The chip on the left has a hole burned in it.posted_image

-------------
Christian



Replies:

Posted By: i am an idiot
Date Posted: April 12, 2008 at 2:29 PM

You can replace those with an IRFP064, available from digikey.com for 6.00 each.  Chances are there are not the only bad parts in the amplifier.  Have you checked the output transistors to see if they are shorted?  Before you try to remove these transistors and ruin your amp, let me know and I can help you get them off of the strip that they are mounted to.  This involves a 20 dollar torch from radio shack, a can of butane that they do not sell at radio shack.   Do not try to remove them with pliers, you need to use the torch.

https://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=IRFP064NPBF-ND


Print Page | Close Window