SHO JBL

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=10404
Printed Date: June 04, 2024 at 3:38 PM

Topic: SHO JBL

Posted By: midospike
Subject: SHO JBL
Date Posted: March 04, 2003 at 4:14 AM

Hello,

I am pulling the stock head unit out of my SHO with the prem JBL sound (amp sub etc..). I want to tap into the inputs of the JBL amp from the RCA"S of the head unit. I am guessing the output from the head(ford) is low volt like RCA's. I did it years ago but for got with wires i cut and tapped into. Any help would be great.

marc

Replies:

Posted By: esmith69
Date Posted: March 04, 2003 at 1:31 PM

Yes you are correct, the output from the head unit is low-level, however the output from the factory amp is obviously high-level. What are you trying to accomplish doing this? Are you putting in an aftermarket head unit and still retaining the use of the factory amps? If so you should use an OEM integrator harness, but first lemme ask you...what year is the vehicle?

Posted By: midospike
Date Posted: March 04, 2003 at 2:48 PM

The car is a 95 sho with the top of the line JBL. Yes for now i want to hook up the aftermarket rca's to the factory system. what do i need to do? thanks

Posted By: esmith69
Date Posted: March 04, 2003 at 9:24 PM

https://www.crutchfield.com/cgi-bin/S-QKaf4nosDbb/ProdView.asp?s=0&c=11&g=751&I=142CFDK5&o=p&a=1&cc=01

This one uses the aftermarket head unit's speaker outputs instead of the RCAs but it'll still sound the same.

Print Page | Close Window