01 caravan w/ infinity

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=104968
Printed Date: May 12, 2025 at 2:01 AM

Topic: 01 caravan w/ infinity

Posted By: sstrawsb
Subject: 01 caravan w/ infinity
Date Posted: May 24, 2008 at 1:31 PM

ugh. This is the first radio in a while thats put up a fight. Well after a little while of searching I stumbled across this thread: https://www.the12volt.com/installbay/forum_posts.asp?tid=27049&KW=chrysler+

Woohoo I hooked a wire up and got the amp to turn on but the speakers will flick in and out depending on the volume level. Can anyone help me out?

Replies:

Posted By: mobile1
Date Posted: May 25, 2008 at 11:52 PM

what are you using for a ground? I know some of those have the spade connector AND the ring terminal with the braided wire on the factory radio. You might want to try grounding the radio to the chassis.

Posted By: boogeyman
Date Posted: May 26, 2008 at 8:50 AM

yeah , I would do what Mobile 1 suggested,sounds to me like a ground issue, ground to chasis..............I've got in the habit of not using the ground on the harness, just grounding to the Chassis everytime to avoid this. good luck

Posted By: sstrawsb
Date Posted: May 26, 2008 at 9:44 AM

Thanks guys. Ill post what worked for me so others can use it as a resource. I did ground the radio to the chassis and that didnt seem to fix the problem. I then wired a relay to turn on the remote wire and it worked fine. Weird, it was the first time I had to do that but it worked.

Thanks guyd

Posted By: kassdog
Date Posted: May 26, 2008 at 11:57 AM

Its not a ground issue. I had the same issue when I did my first one. I hooked up another relay to boost the amps and it worked fine. Try that.

Print Page | Close Window