bridge pdx 4x100
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=105034
Printed Date: May 21, 2024 at 9:28 PM
Topic: bridge pdx 4x100
Posted By: ty50
Subject: bridge pdx 4x100
Date Posted: May 26, 2008 at 9:54 PM
I want to 86 my rear fill in a pick-up. I have the Alpine pdx 4x100 powering the front and rears currently.
But after getting rid of the rears, i want to utilize the 200 watts from the rear. The manual is vague at best and I want bridge this thing.
the speaker connectors are not typical.anyone done this yet?
-------------
he who travels the fastest travels alone
Replies:
Posted By: techman93
Date Posted: May 26, 2008 at 10:20 PM
If you connect to positive of channel 3 and negative of channel 4 that will bridge 2 ch to one and the same for channel 1 you would use positive and channel 2 you will use negative. I looked up the owner manual on Alpine.com.
-------------
The wire I'm test'n isn't doin' what it's supposed to be doin'... I am so glad I printed that tech sheet, with the wrong info.
Do it right the first time... or I might have to fix it for ya
|