replacing stolen amp/sub setup

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=105119
Printed Date: May 13, 2025 at 8:32 PM

Topic: replacing stolen amp/sub setup

Posted By: s-k-f
Subject: replacing stolen amp/sub setup
Date Posted: May 29, 2008 at 10:41 PM

I had an amp and sub set up that was basically unplugged and removed from my car, I was given a replacement, xplod XM-2165GTX with an 1100 watt xplod sub. I have been able to attach all the cables except for the one connected to the power/volume of the sub control in the car. This looks like a phone plug in. What do I need to plug this into or what kind of adapted do I need to make this work?

Replies:

Posted By: davngr
Date Posted: May 29, 2008 at 11:05 PM

the remote loudness/base knob would only work if the amplafier you are installing now is the same as the one that was stolen. if indeed it is, look for a phone jack like plug. if not, just get rid of it. hope that helps answer your question.

-------------
life is a comedy to think, a tragedy to feel

Posted By: s-k-f
Date Posted: May 30, 2008 at 10:32 AM

That answers my question, but it was not the answer I was looking for. It is a different amp... Can I get a new remote loudness/base knob when there doesn't seem to be anything on the amp for it to plug into? Where can I buy something like this?

Print Page | Close Window