amplifier

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=105294
Printed Date: May 12, 2025 at 8:31 PM

Topic: amplifier

Posted By: expo01
Subject: amplifier
Date Posted: June 06, 2008 at 5:01 PM

Amplifier is a Alpine F353. 5 channel amp. It is, I believe, 4x50w plus the 5th channel is mono 200w. I want to know, and have searched with out any results, can this amp be ran 4 ohm in the 4 channels but run the 5th mono in 2 ohm. Will the amp allow this or would everything have to run 4 or 2 ohm.

Thanks in advance for any helpful information.

Replies:

Posted By: i am an idiot
Date Posted: June 06, 2008 at 5:47 PM

As far as I can tell from the manual, this amp will NOT run a 2Ohm load on the sub channel.

https://www.alpine.com.au/downloads/web_owners_manuals/amp_owners_manuals/MRV-F303+MRV-F353.PDF

Print Page | Close Window