how to wire two pyle woofers

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=105412
Printed Date: May 06, 2024 at 2:46 PM

Topic: how to wire two pyle woofers

Posted By: joshua6636
Subject: how to wire two pyle woofers
Date Posted: June 11, 2008 at 5:50 PM

hey i got two pyle driver woofers item number #PLD12WD and a pyle amp item number #PLAD3300D. I was wondering how best to wire to get the most watts but not fry my amp. Also i was wondering how good these woofers are and if the amp i got was decent. THank you.

Replies:

Posted By: i am an idiot
Date Posted: June 11, 2008 at 6:36 PM

How many voice coils does each woofer have? What is the impedance of each voice coil? And just so we don't have to do the footwork, what is the minimum ohm load that your amp is capable of driving? Please answer all 3 questions.

Posted By: joshua6636
Date Posted: June 11, 2008 at 7:10 PM

each woofer has 4 layer dual voice coils. nominal impedence Dual 4 ohms.

The amp1x600W RMS at 4 Ohms, 1x1800W RMS at 2 Ohms 1x3600W MAX at 1.3 Ohms

Posted By: i am an idiot
Date Posted: June 11, 2008 at 9:49 PM

Option 2 (series/parallel) = 4 ohm load
Voice coils wired in series, speakers wired in parallel
Recommended Amplifier: Stable at 4, 2, or 1 ohm mono

Print Page | Close Window