4 ch Sony Amp

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=10566
Printed Date: July 16, 2025 at 9:48 PM

Topic: 4 ch Sony Amp

Posted By: rjmartinez
Subject: 4 ch Sony Amp
Date Posted: March 07, 2003 at 6:46 PM

Quick one.

I have a Sony explode 604-ex 4 ch amp.

I know i can bridge the two channels together but can I bridge all four into one making it a mono bass amp?

I am running a SINGLE voice coil 12" woofer.

Also if you can how do you wire it?

Thanks!

Replies:

Posted By: esmith69
Date Posted: March 07, 2003 at 10:15 PM

to my knowledge you cannot bridge a 4-channel amp to a single output channel. Best you can hope for is using 2 of the channels for the sub and the other two for another pair of speakers inside the vehicle, or obviously it would work with a DVC sub but as you pointed out the sub you have is not DVC.

Print Page | Close Window