kenwood xm adapter

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=105711
Printed Date: November 04, 2025 at 5:08 AM

Topic: kenwood xm adapter

Posted By: joch1314
Subject: kenwood xm adapter
Date Posted: June 26, 2008 at 3:18 PM

First....has anybody used the new XM adapters, and what do you think!

I personally do not care for this setup....it's gay that you have to program it, then some models aren't even compatible!

Second....I'm trying to get an XM adapter for the Kenwood KDCX692. I had a customer come with the new XM Direct 2 setup with the kenwood adapter and it's not compatible with his deck....does anybody know if the Older XM tuners and the Kenwood adapter will work or is he out of luck!?

Thanks for the replies..

-------------
...half of the truth can be worse than a lie. <----Roger Russell said that..

Replies:

Posted By: joch1314
Date Posted: June 26, 2008 at 6:32 PM

anybody have any ideas on this??

-------------
...half of the truth can be worse than a lie. <----Roger Russell said that..

Posted By: lspker
Date Posted: June 26, 2008 at 9:34 PM

Did he have the Kenwood SR50 adapter that goes between the two radios?

Posted By: joch1314
Date Posted: June 27, 2008 at 11:40 AM

it didn't need the sr50 adapter as this model doesn't have a screen! only the models with the screens need the ca-sr50 adapter.

The problem is that it isn't compatible, and was wondering if the 2007 model XM tuners and adapters will work, or if he's gonna have to go with a plug and play unit and hook it to the aux in!?!

Any takers......

-------------
...half of the truth can be worse than a lie. <----Roger Russell said that..

Posted By: lspker
Date Posted: June 27, 2008 at 9:24 PM

Sr50 works without screen, but its for Surius.

Check for software update for 692.

Posted By: terohc
Date Posted: June 29, 2008 at 9:26 AM

wHAT IS NEEDED IS THE OLDER (XMD-KEN100) until Audiovox gets all their model specific programming done.