Print Page | Close Window

fosgate p3s how much power?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=105806
Printed Date: May 10, 2024 at 2:23 PM


Topic: fosgate p3s how much power?

Posted By: jaketime81
Subject: fosgate p3s how much power?
Date Posted: June 30, 2008 at 3:20 PM

Im trying to match up an amp for a customers single fosgate 12 inch p3s sub, does any one know how much power these subs handle, i dont have full internet access and cannot go to thier site. Thanks 

-------------
jake



Replies:

Posted By: jar754
Date Posted: June 30, 2008 at 3:32 PM
500rmsx1000max




Posted By: joch1314
Date Posted: June 30, 2008 at 3:57 PM

does it have Dual 4 ohm voice coils....or dual 2 ohm voice coils.....

i would recommend two different amps for each sub



-------------
...half of the truth can be worse than a lie. <----Roger Russell said that..




Posted By: jaketime81
Date Posted: July 02, 2008 at 1:55 PM

Thanks for the info,

its a dual 2ohm sub, wired to 4ohms,he origionally purchased a kicker 400.1 mono amp., exchanged it for a 2ch.



-------------
jake




Posted By: joch1314
Date Posted: July 02, 2008 at 2:45 PM

that's what i would've recommended....get a good 2 ch. amp and bridge it to one 4 ohm load! 

or if it was a dual 4 ohm....get a good mono amp and wire it for a 2 ohm load!

just like you've done!!



-------------
...half of the truth can be worse than a lie. <----Roger Russell said that..





Print Page | Close Window