Print Page | Close Window

pioneer deh p860mp

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=106013
Printed Date: June 03, 2024 at 2:49 PM


Topic: pioneer deh p860mp

Posted By: promaldini
Subject: pioneer deh p860mp
Date Posted: July 09, 2008 at 10:06 AM

I have a DEH-P860MP with a non-working motorized faceplate. When you push the 'open' button the unit beeps, but the faceplate does not open. Any ideas what may cause this? This was originally an intermittent problem. Now it seems permanent. The unit makes no mechanical noise when the button is pushed, just the confirmation beep. This leads me to believe the problem is electronic rather than mechanical. I've heard that the ribbon cable between the main unit and the faceplate mount frequently goes bad in these models. Does that seem like a reasonable cause? Pioneer does not list the ribbon cable as a replacement part on their web site. Any idea where I might get one? Any info would be great. Thanks.

-------------
Paul Romaldini



Replies:

Posted By: i am an idiot
Date Posted: July 09, 2008 at 4:07 PM

CNP7698  is the part number for the cable   1-800-421-5080 is the phone number for Pacific Coast Parts.

If the face is making no attempt to fold down, I really do not think the cable is bad.  The beginning symptom of the cable is the face will go down about 1/4 inch and deck turns off.  





Print Page | Close Window