factory sound system upgrade
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=106065
Printed Date: May 02, 2024 at 5:14 PM
Topic: factory sound system upgrade
Posted By: nusense
Subject: factory sound system upgrade
Date Posted: July 11, 2008 at 8:29 PM
hello, i'm trying to upgrade the factory amp and subwoofer i my '00 Tahoe. i want to keep the factory head unit, but i want to add a modulator to run rca's to the new amp. can anyone assist me with which wires to hook up to, or link me to old posts? i've been lookin fo like an hour now
Replies:
Posted By: jar754
Date Posted: July 11, 2008 at 9:55 PM
look at jl audio's clean sweep
Posted By: i am an idiot
Date Posted: July 11, 2008 at 10:53 PM
Remove the woofer from the enclosure, there should be 2 sets of wires going to the woofer. Each pair of wires has a wire with a black stripe on it. That is the negative wire of that pair. Purchase a simple Line Out Converter, wire it to those wires and run the RCA cable from there to your new amp. If there is only one set of wires going to the woofer, wire both the grey and white pairs of wires of the LOC to the set of wires that went to the woofer.
Posted By: nusense
Date Posted: July 13, 2008 at 1:04 AM
cool, thanx. but do you know which wire is the remote wire from the hu?
|