remote wire for second amp?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=106395
Printed Date: May 11, 2024 at 11:30 AM

Topic: remote wire for second amp?

Posted By: bullseye753
Subject: remote wire for second amp?
Date Posted: July 27, 2008 at 6:17 PM

Im going to be installing my second amp.. i am going to use a distro. block for the power.. but for the remote can i just bridge it from amp to amp? is this a perfectly safe thing to do?

-------------

Replies:

Posted By: audioinstaller3
Date Posted: July 27, 2008 at 7:15 PM

Yes its fine just to run the remote wire from one amp to the other

Posted By: audiocableguy
Date Posted: July 27, 2008 at 8:59 PM

I use a 30A Bosch Relay on the Remote wire at the deck. A 3 amp fuse to a relay to processors, amps etc. Adding more gear later, no problem. If a short does occur the deck won't be damaged. It's worth the $6 for the relay and 10 minutes of time.

Posted By: s_goodie
Date Posted: July 29, 2008 at 11:24 PM

yes no problem other than loks unless you hie it good but it will work the same

-------------
Stuey BABE

Print Page | Close Window