purchasing a fi btl
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=106420
Printed Date: May 21, 2024 at 2:48 AM
Topic: purchasing a fi btl
Posted By: s_goodie
Subject: purchasing a fi btl
Date Posted: July 29, 2008 at 2:55 AM
i am about to purchase a Fi BTL and im not sure how to order it it hasmany differnt ways to do it i can get it 1 or 2 ohm and i also can get a P Chamfer and i also can get cooling and i also can get hixm coil and i alos can get daily or spl and i can get induct heating ring and ialso can get it universal or not how should i order it PLEASE HELP
-------------
Stuey BABE
Replies:
Posted By: s_goodie
Date Posted: July 29, 2008 at 4:41 AM
BTL18 | DUAL 1 | DUAL 2 | | | | Fs: 00.0 Hz | 00.0 Hz | | Re: 0.7 Ohms/coil | 1.5 Ohms/coil | | Qms: 0.00 | 0.00 | | Qes: .00 | .00 | | Qts: .00 | .00 | | Mms: 000g | 000g | | Cms: 0.00mm/N | 0.00mm/N | | Sd: 1210cm^2 | 1210cm^2 | | Vas: 00.0 l | 00.0 l | | Spl: 00.0dB 1W/1m | 00.0dB 1W/1m | | Bl: 00.0 N/A | 00.0 N/A | | Xmax: 16mm * | 16mm * | | Rms: 2000W * | 2000W * | | Sealed box: N/A cuft | N/A cuft | | Ported box: 5-10cuft | 5-10cuft | | Sub OD: 18.500” | 18.500” | | Cut ID: 16.750” | 16.750” | | Mounting depth: 9.750” * | 9.750” * | | Displacement: 0.26cuft * | 0.26cuft |
------------- Stuey BABE
Posted By: aznboi3644
Date Posted: July 29, 2008 at 8:10 PM
options depends on how much power you are going to feed the subwoofer
Posted By: s_goodie
Date Posted: July 29, 2008 at 10:17 PM
probably around 1500 or 1600 watts hifonics amp
-------------
Stuey BABE
Posted By: aznboi3644
Date Posted: July 31, 2008 at 10:55 PM
well with that power a stock BTL would do. There is no need for extra options.
|