amp power cable problems
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=106492
Printed Date: April 30, 2024 at 4:51 PM
Topic: amp power cable problems
Posted By: jonsmith210210
Subject: amp power cable problems
Date Posted: July 31, 2008 at 7:20 PM
I just bought a new Dodge Ram 2008 Q cab 1500. I want to install an amp, but I can’t figure out how to run the 12 volt power lead. I do not want to drill any holes in my new truck. Does anyone have any suggestions on the best place to run the power cable? I am running two amps of this line and need to be directly connected to the battery. I think I can go in behind the front passenger side kick panel, but I can’t figure out how to remove it. Any advice would be much appreciated.
-------------
Jon Smith
Replies:
Posted By: still_walkin
Date Posted: August 03, 2008 at 11:12 AM
Those new cars hide the screws look for circles bout a 1/4 wide the usually covers for the screws. Also find a wire that is going through your firewall and your can put your power wire through the firewall if you can find one you might have to drill so look hard.
-------------
1993 sdv
Alpine 4x6 6x9 5 1/4 swr-10d4
alpine v60
12.5 VGA flip down
Nettop pc w/10" touch screen
78nova
5-re audio 5x7 ,10" sub &
Xtx-500.5
"Take the faceplate off get the jumperpack"
Posted By: kickz l7
Date Posted: August 04, 2008 at 12:27 AM
Just find were some wires are going may be like a big thing of rubber just carefully put a little slice in it and put the wire through
|