porting single cab truck box?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=106559
Printed Date: May 10, 2025 at 11:19 PM

Topic: porting single cab truck box?

Posted By: kickz l7
Subject: porting single cab truck box?
Date Posted: August 04, 2008 at 12:22 AM

Is it possible to port a truck sub box? if you need pictures of it i can get them box is already made but it is sealed

Replies:

Posted By: megaman
Date Posted: August 04, 2008 at 11:18 AM

Yes you can. As long as you have the room for the extra space required for a ported enclosure. I've built them in the past and the scenario is usually a single 12" sub. Slot ported is easier in this case.

Posted By: kickz l7
Date Posted: August 04, 2008 at 11:39 AM

It is for a 12" kicker l7 but it is an oddly shaped box im not sure of were i should port it. If you want pictures i could get you some?

Posted By: DYohn
Date Posted: August 04, 2008 at 12:38 PM

No, you cannot simply port any existing enclosure - well, of course you CAN cut a hole in it, but only if you don't care that it might sound like ass. You need to know the internal volume of the enclosure to see if it it useful as a vented system.

-------------
Support the12volt.com

Posted By: kickz l7
Date Posted: August 04, 2008 at 11:12 PM

im not sure on how to get the airspace of this box it is an odd shape and is pretty big

Posted By: i am an idiot
Date Posted: August 04, 2008 at 11:36 PM

Post the dimensions of the box and let us know how thick of material was used, and we can figure that part out for you.

The pictures would help too.

Posted By: kickz l7
Date Posted: August 05, 2008 at 12:58 AM

I will take pictures tommarow and measurement's

Print Page | Close Window