alpine mrd m500
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=106630
Printed Date: May 09, 2025 at 11:50 AM
Topic: alpine mrd m500
Posted By: etaylor32208
Subject: alpine mrd m500
Date Posted: August 07, 2008 at 1:17 PM
I have a question. I just received the MRD-M500. I went to test it on another friend's car but when i ran all the wires to it, I didnt get any sound from it. What could be the problem?
Replies:
Posted By: Alpine Guy
Date Posted: August 08, 2008 at 5:35 PM
It's probably in safe mode. Read the manual on how to get it out.
-------------
2003 Chevy Avalanche,Eclipse CD7000,Morel Elate 5,Adire Extremis,Alpine PDX-4.150, 15" TC-3000, 2 Alpine PDX-1.1000, 470Amp HO Alt.
Posted By: etaylor32208
Date Posted: August 10, 2008 at 11:45 AM
Thanks. I went to have it installed because i didnt know how to set it correctly and it was in safe mode. Also i found out i have 4 ohm subs and they are not the best subs for the amp. So now the amp is set at 8 ohm so i wont blow my subs.
|