Print Page | Close Window

type r comp

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=106752
Printed Date: May 14, 2025 at 1:43 PM


Topic: type r comp

Posted By: chillin420
Subject: type r comp
Date Posted: August 13, 2008 at 4:51 PM

i have a set of alpine type rs that i am running at 4 ohms on a kicker zx350.2  i would like to run them at 2 ohms.  can i wire in a 2 ohm resistor in paralell with the pos and neg wires?  or how would i do this?  thank you for any advice

-------------
you can do it....
advanced MECP, lol does it really matter....
patience is a virtue



Replies:

Posted By: DYohn
Date Posted: August 13, 2008 at 6:11 PM

No, you cannot do that.   There is a sticky thread in this forum discussing the many reasons why this is a bad idea.

An advanced MECP should know this...



-------------
Support the12volt.com



Posted By: chillin420
Date Posted: August 14, 2008 at 1:18 PM
where is the sticky?

-------------
you can do it....
advanced MECP, lol does it really matter....
patience is a virtue



Posted By: the12volt
Date Posted: August 14, 2008 at 1:38 PM
https://www.the12volt.com/installbay/forum_posts.asp~TID~93248~PN~1

-------------
posted_image the12volt • Support the12volt.com


Print Page | Close Window