Print Page | Close Window

2007 tundra crewmax with jbl / nav

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=106936
Printed Date: May 13, 2025 at 8:05 AM


Topic: 2007 tundra crewmax with jbl / nav

Posted By: lildev0426
Subject: 2007 tundra crewmax with jbl / nav
Date Posted: August 21, 2008 at 7:49 PM

Hi folks.  I really need to get the wiring info for the stereo / spks and including the JBL amp for my truck.  I have searched and found a thread on the stereo but was not sure if it was for the premium system with JBL and it did not include the amp wiring.

Thanks!!




Replies:

Posted By: i am an idiot
Date Posted: August 21, 2008 at 8:14 PM

What are you wanting to do?




Posted By: lildev0426
Date Posted: August 21, 2008 at 9:41 PM

I am installing the following:

(keeping stock hu)

jl cleansweep

fronts - id ctx 6.5's

sub - jl 13tw5

rf  t600.4

disconnect rear speaks, sub and jbl amp

i want to run the cleansweep to the t600.4 to the fronts in stereo at 4 ohm and bridged to the sub at 3 ohms.  i was hoping to tie the cleansweep into  the stock amp speaker inputs to avoid taking the stock hu out at all.  i would disconnect the stock jbl amp all together.  i was also going to use the amp turn -on lead to the cleansweep and use the cleansweep turnon lead to the t600.4.

does this sound like a legit plan or am i missing something that makes this not possible or feasible?

THANKS FOR YOU GUYS HELP!!


Print Page | Close Window