bass blockers

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=107335
Printed Date: April 19, 2024 at 4:51 AM

Topic: bass blockers

Posted By: deegz97
Subject: bass blockers
Date Posted: September 09, 2008 at 3:35 PM

Hi all,

I was recommended by the manufacturer of my speakers (coax 6.5's) to add a bass blocker on the positive input. The manufacturer recommended a 200 Mfd @ 100v, non-polarized. Well, i got a hold of them, and they are big. How can i figure out which frequencies they are going to inhibit from my 6.5's? I am going to put them on this weekend, just kind of curious before the fact if there will be any mid at all...

Thanks again!

Jeff

Replies:

Posted By: DYohn
Date Posted: September 09, 2008 at 3:53 PM

https://www.the12volt.com/caraudio/crosscalc.asp#cc

At 4-ohms, 200mfd = about 200Hz high pass.

-------------
Support the12volt.com

Posted By: deegz97
Date Posted: September 09, 2008 at 4:39 PM

DYohn] wrote:

p>https://www.the12volt.com/caraudio/crosscalc.asp#cc
At 4-ohms, 200mfd = about 200Hz high pass.

Thanks alot, but taking the risk of sounding dumb - i don't understand any of this...is there another sticky I could reference for some guidance?

Posted By: the fat kid
Date Posted: September 09, 2008 at 5:13 PM

ive never found a pair to work right, idk i had them installed with my door speakers on my blazer when i was 16 and they just didnt work right, if you got the cash get an amp with a high pass filter or a headunit with that option.

Posted By: DYohn
Date Posted: September 09, 2008 at 6:20 PM

deegz97 wrote:

DYohn] wrote:

https://www.the12volt.com/caraudio/crosscalc.asp#cc
At 4-ohms, 200mfd = about 200Hz high pass.

Thanks alot, but taking the risk of sounding dumb - i don't understand any of this...is there another sticky I could reference for some guidance?

Follow the link on the left titled "Passive Crossovers."

-------------
Support the12volt.com

Print Page | Close Window