Print Page | Close Window

speed pulse generator on 07 ford fusion

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=107816
Printed Date: May 10, 2025 at 5:25 PM


Topic: speed pulse generator on 07 ford fusion

Posted By: johnsanz
Subject: speed pulse generator on 07 ford fusion
Date Posted: September 30, 2008 at 10:06 AM

I have a Pioneer AVIC-D3 Navigation/DVD unit, I have everything setup (Bluetooth/XM Radio/Amp) and ready to mount it on my 07 Ford Fusion. The pink wire coming out of the power cord is for the Speed Pulse Generator wire.. apparently this wire is very important for the navigation system, it can also be replaced by a NDPG1 (I believe) which is another after factory speed pulse generator.

So, where can I locate this wire? what color is it?

I found in some other forum that it is a light GREEN / WHITE wire on the back of the radio, but on the AVIC-D3 Installation Guide says this wire is coming from the computer.. so I am kind of confused.

Any ideas where is this wire exactly located and color? Please, will be very much appreciated!



-------------
-Johnsanz
All I know is that I Know Nothing



Replies:

Posted By: KarTuneMan
Date Posted: September 30, 2008 at 11:44 AM
VSS is BROWN / white @ the pcm next to the battery. Pin 56

-------------



Posted By: johnsanz
Date Posted: September 30, 2008 at 12:10 PM

WOW!! That was quick!

Thank you very much! I'll keep you posted! thanks again!



-------------
-Johnsanz
All I know is that I Know Nothing



Posted By: basstoy
Date Posted: January 20, 2009 at 7:35 PM
how do you read the pin layout?? I need that wire too thanks!


Print Page | Close Window