my ppi a600 gets really hot
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=107906
Printed Date: May 01, 2024 at 8:43 PM
Topic: my ppi a600 gets really hot
Posted By: snhtown
Subject: my ppi a600 gets really hot
Date Posted: October 03, 2008 at 1:41 PM
hey guys, decided to try my old sub amp for my mids/highs so i hooked it up, speakers sound great with it. only problem is the amp is geting very hot. this is after listening for 15 mins. i dont remember it getting this hot before when i used it to power my subs. i am running alpine spx177a. i have the mid range and the tweets wired to the x/o's and then to the PPI amp. i dont have them bridged or anything. i was thinking bridging it would change the ohm load the amp will see. anyone have this problem with this amp in the past?
Replies:
Posted By: i am an idiot
Date Posted: October 04, 2008 at 6:07 PM
Turn the amplifier on but leave the volume of your deck at zero. Leave it on for the 15 minutes and let me know if it is still getting hot.
|